2D codes
DotCode generator
Type your value and see it drawn as DotCode. Print it on label paper, or download it.
Make your own
Sets the printed size of the downloads.
Sample: EncodeLabel
Type your own value to download it. The SVG prints at the size shown; the PNG is drawn for a 600 dpi printer. Each picture counts as 1 label. Free for up to 100 labels a month. No account needed.
Each picture counts as 1 label. Free for up to 100 labels a month. No account needed.
What DotCode is for
Codes made of separate dots for very fast inkjet or laser marking, for example on cigarette packs.
DotCode is made of separate dots on a grid with no solid lines, so a fast inkjet or laser can mark it on products moving along a production line without the dots running together. It needs a scanner that knows DotCode: phone cameras and most handheld scanners don’t read it, so it suits marking at the factory rather than labels people scan.
What fits
Any text.
Needs a specialised scanner: not for labels people scan with a phone.
Size facts
- Shape
- A grid of small squares, called cells.
- The sample
- 24 cells across and 17 down, plus its blank margin.
- At 0.5 mm cells
- The sample is about 14.9 × 11.4 mm (0.59 × 0.45 in) with its margin.
- Rule of thumb
- Keep each cell at 0.4 mm or more. Under 0.25 mm it is too small to scan reliably.
- Blank margin
- 3 cells on every side. It is already part of what we draw.
Sizes are advice, never a block: you can print smaller, and the size line beside the preview says what to expect. Check that it scans before you print a big batch.
Questions
- Do I need an account to make DotCode labels?
- No. Free for up to 100 labels a month, with no account needed. Each label you print, and each SVG or PNG you download, counts as one. What you see on screen never counts.