In short
- Free for up to 100 labels a month. No account needed.
- EncodeLabel draws the barcode. The number is yours to get right: we don’t issue UPC or GS1 numbers.
- Print one test sheet and scan it before you print a batch.
- What you put on your labels is your responsibility.
- Credits and printed labels are paid for through Stripe. Their rules are in sections 10 to 12.
1. What EncodeLabel is
- EncodeLabel is a website for making and printing labels: barcodes such as UPC-A, QR codes, RFID and EPC data, and address labels from a spreadsheet. You pick a label paper, then print or download a PDF.
- It’s a tool. What you make with it is yours and is up to you. We don’t check, approve or register the labels you make, and we don’t keep a record of them unless you save them to an account or order them printed.
- Your labels are made in your own browser. The Privacy Policy explains what does and doesn’t reach us.
2. Who can use it
- You must be at least 13. If you’re under 18, you need a parent’s or guardian’s permission, and a parent or guardian must do any buying for you.
- If you use EncodeLabel for a business or other organization, you agree to these terms for it too, and you confirm you’re allowed to.
3. Free labels each month
- Making labels and looking at previews costs nothing. Producing them is what’s counted: you can produce up to 100 labels each calendar month without paying, with or without an account. Months follow the calendar in New York time, and the free labels renew on the 1st.
- What counts. Each label position in a PDF or a print job counts as one, so a sheet of 30 is 30. A single label downloaded as a picture (PNG or SVG) counts as one. Each tag in an RFID export counts as one.
- What never counts. Previews on the screen, the alignment test page, and producing the same job again within 24 hours, so lining up a sheet or downloading it a second time costs nothing.
- Who is counted. If you’re logged in, we count by your account. If you’re not, we count by your internet connection and the kind of browser you use, so people who share a connection and use the same kind of browser share one allowance. A free account has its own.
- Past the free labels, a job needs credits (section 10). A job that needs more than you have is not produced, and nothing is counted for it; you can choose to produce just the labels you have left.
- If our server can’t be reached when you print, your labels are still produced and nothing is counted.
- The number of free labels is ours to set and may change. The number on this page is always the current one.
4. Your account
- You don’t need an account to make or print labels. An account lets you save labels and datalists and come back to them, buy credits and order printed labels.
- Use your own name and an email address that’s yours. It’s the only way we can help you back in if you forget your password.
- Keep your password to yourself. You’re responsible for what happens in your account.
- One account per person, please. Don’t make extra accounts to get more free labels.
- If you think someone else has got into your account, change your password on the Account page (or use “Forgot your password?” on the log-in page), and email privacy@encodelabel.com.
5. Barcode numbers are yours to get right
- EncodeLabel draws a barcode for whatever number or text you give it. It doesn’t give you the number.
- We don’t issue, sell, rent, license or register UPC, EAN, GTIN or any other GS1 numbers, GS1 Company Prefixes, ISBNs, EPC or RFID company prefixes and serial ranges, postal Mailer IDs, or any other official number. If you need a UPC to sell a product in shops or on online marketplaces, you get it from GS1 (in the United States, GS1 US), not from us.
- We can’t tell whether a number belongs to you, is already used by someone else, is unique, or will be accepted by a retailer, marketplace, carrier or post office. A check digit that adds up only shows the number is well formed. It doesn’t show the number is valid, or yours.
- The numbers in our examples are examples. Don’t put them on real products.
- Only use numbers you have the right to use.
- QR codes. A QR code made here simply holds what you typed. It doesn’t pass through EncodeLabel when someone scans it, so we can’t change it, count its scans or switch it off later, and it won’t stop working if EncodeLabel does. Check that it says exactly what you want before you print.
- RFID, EPC and NFC. EncodeLabel works out the data and makes the printer file; your own printer or encoder writes the chip. The data follows the published formats as best we can, but some tags can’t be changed once they’re written or locked. Try it on a spare tag first.
- Postal barcodes. A barcode is not postage. Mailing barcodes such as the Intelligent Mail barcode only work with your own Mailer ID and under the Postal Service’s rules.
6. Test before you print a batch
- Screens, printers, label paper, ink and scanners all differ. Before you print a batch, or put labels on anything that matters, print one sheet on plain paper, hold it up against your label sheet, and scan the barcodes with the kind of scanner that will really be used.
- Print at 100% (“Actual size”). Settings such as “Fit to page” shrink barcodes and shift labels.
- Our label-paper layouts are our own measurements. Makers change their products, and sheets vary from pack to pack, so check the fit against the sheet in your hand.
- Our advice about barcode sizes is advice. Whether a label meets the rules of a retailer, marketplace, carrier, post office or regulator (for example GS1’s size and print-quality rules) is for you to check.
7. What you put on labels, and lists you upload
- You’re responsible for everything you type, upload, save, print or order with EncodeLabel: that it’s accurate, that you have the right to use it (including names, logos, images and brands), and that it’s lawful where you make it and where you use it.
- When you open a spreadsheet, your browser reads it. It isn’t sent to us. A list only reaches our server if you’re logged in and press Save, or if you order labels printed from it.
- Address lists. If you upload, save or order from a list of other people’s names and addresses, that list is yours and you’re responsible for it. You confirm that you have the right to use those details for your mailing and, if you save the list or order from it, to pass them to us for that, and that you’ll follow the privacy and marketing laws that apply to you. That includes telling people how you use their details where the law asks you to, and taking people off your list when they ask.
- We only keep a list so you can use it again, or to print the order it came with. We don’t contact the people in it, sell it, share it or use it for anything else. The Privacy Policy says more under “Lists with other people’s details”.
- Don’t put sensitive information in labels or lists you save or order: Social Security or other government ID numbers, payment card or bank details, passwords, health information, or details about children. EncodeLabel isn’t built to protect that kind of information.
- Labels with rules of their own. Some labels are covered by special rules: hazard and chemical labels, shipping labels for dangerous goods or batteries, medicine, food and allergen labels, medical-device labels, safety and certification marks, and vehicle or serial-number plates, for example. EncodeLabel doesn’t know those rules and doesn’t check your labels against them. If you use it for labels like these, getting them right is entirely up to you.
8. Things you must not do
- Break the law, or help anyone else to.
- Make counterfeit or fake labels: copies of another company’s product, packaging, authenticity, warranty, security or serial-number labels; fake postage, shipping, customs or carrier labels; fake tickets, passes, coupons, gift cards, IDs, permits or inspection stickers.
- Mislead people: labels with a false price, weight, ingredients, origin, date, certification or safety mark; swapping barcodes to pay a lower price; or putting someone else’s product number or brand on your goods.
- Mislabel dangerous goods, leave off or falsify hazard, chemical or battery information, or hide what’s in a package.
- Make QR codes that lead to scams, fake log-in pages or harmful downloads, or stick your code over someone else’s.
- Use names, logos or trademarks you don’t have the right to use.
- Use address lists you don’t have the right to use, or mail people who’ve asked you to stop.
- Get around the monthly count of free labels, for example by changing the site’s scripts, hiding your connection or making extra accounts.
- Try to break into EncodeLabel, overload it or get around its protections; use bots or scripts to make accounts or copy the site, its label layouts or its data in bulk; or put EncodeLabel inside another site or app as if it were yours.
- Upload viruses or anything else harmful, or use saved labels and datalists to store unrelated files.
We may remove saved labels and datalists, refuse or cancel orders, and suspend or close accounts, that break these rules, without warning if we need to.
We can’t see labels you make without saving or ordering them, and we don’t routinely look at what you save. We may look at saved content when it’s reported to us, or when we need to in order to fix a problem or keep EncodeLabel safe. We do look at the labels in an order, because we print them.
9. What you save
- Your labels and datalists stay yours. You let us store them, back them up and show them back to you when you’re logged in, and print them when you order them printed, only as needed to run EncodeLabel.
- We don’t claim any rights in the labels you make. You can use them for anything lawful, including for business.
- Saved work can be lost. Keep your own copy of anything important: download the PDF, and keep your original spreadsheet.
- When you delete a label, a datalist or your account, it’s removed from the site straight away. A copy may stay in our hosting company’s routine backups until those are overwritten. What deleting an account does to credits and orders is in the Privacy Policy.
- There are limits on how much you can save: 200 labels and 100 datalists per account, and a largest size for each. We may change them.
For lists you save or order from, we: only store them, show them back to you and print your order from them; keep them as safe as we reasonably can; let only the people who run EncodeLabel reach them, and only when needed; use our web hosting company to store them and nobody else; delete them when you delete them; tell you without delay if we learn someone else has got at them; and help you, as far as we reasonably can, if someone on your list asks you about their details.
10. Buying credits
Credits are sold only while we have that switched on. If the site doesn’t offer them to you, they aren’t for sale at the moment. Credits you already have keep working either way.
- What a credit is. 1 credit prints 1 label. Credits are used only after your free labels for the month are gone, and only for jobs you produce while logged in.
- You need an account to buy credits. They come in packs, at the prices shown when you buy.
- Credits are added to your account when Stripe tells us your payment went through, usually within a few seconds. Until then they aren’t there to use.
- Credits don’t expire.
- Credits belong to the account that bought them. They can’t be moved to another account, sold, or swapped for money, and they have no cash value.
- Refunds. If you change your mind, email privacy@encodelabel.com within 14 days of buying a pack and we’ll refund it, as long as none of that pack’s credits have been used. Once credits from a pack have been used, the pack can’t be refunded, unless the law where you live says otherwise. A refund takes the pack’s credits back out of your account.
- If credits were taken for a job that went wrong because of a fault on our side, tell us and we’ll put them back.
- Deleting your account gives up any credits left in it. They can’t be brought back or refunded afterwards, so use them, or ask for a refund you’re entitled to, first.
- If we ever stop selling credits for good or close EncodeLabel, we’ll say so on the site and refund what you paid for credits you haven’t used.
11. Ordering printed labels
Printed labels can be ordered only while we have that switched on. If the site doesn’t offer “Order these printed”, we aren’t taking orders at the moment.
- What you’re ordering. Labels printed by us from your own design and, if you used one, your own datalist, with the options you choose (such as the printing, finish, cut and material). They are made to order, for you only.
- The preview is the proof. The order page shows your labels, the quantity, the options and the price. Check all of it: spelling, numbers, addresses, barcode values, sizes and quantities. When you tick the box and pay, you approve what the preview shows, and that is what we print. We don’t proof-read or correct orders, and we don’t check that your barcodes carry the right numbers or will be accepted by anyone (section 5).
- What reaches us. When you pay, the design and the datalist for the order are sent to us and kept with the order, so we can print it. Stripe then passes us the delivery name and address, email address and phone number you gave at checkout.
- Print isn’t a screen. Printed colours never match a screen exactly, and printing and cutting can be off by a small amount. Keep anything important away from the edge of the label.
- Delivery. We deliver only to the countries offered at checkout. Printing and delivery times shown on the site are our best estimate, not a promise.
- If we get it wrong. If your labels arrive damaged, misprinted, in the wrong quantity or different from the preview you approved, or don’t arrive at all, email privacy@encodelabel.com within 14 days of delivery (or of the day they should have arrived) with your order number and, where it helps, photos. We’ll reprint the order at no charge or refund it. Tell us which you’d prefer; if a reprint can’t put it right, we’ll refund.
- If the mistake was in what you sent. Because the labels are made just for you, we can’t take them back or refund them for mistakes in what you sent or approved (a typing mistake, a wrong number, the wrong size or quantity), or because you changed your mind after printing started.
- Cancelling. An order you haven’t paid for can be cancelled on its own page, and is removed by itself after a week. An order you’ve paid for can be cancelled for a full refund until we start printing it: email privacy@encodelabel.com straight away with the order number. Once its status says “Being printed”, it can’t be cancelled.
- We may turn down an order, or cancel one we can’t print or deliver (for example labels that break section 8). If you’ve paid, we refund you in full.
- Refunds go back through Stripe to the card or method you paid with.
12. Prices, payment and taxes
- Prices are shown on the site in the currency stated there, and can change. The price that applies to you is the one shown when you pay.
- For printed labels the order page shows the whole price before you pay: the labels, any set-up charge or minimum order, and delivery. The total is worked out on our server from the price list, and it is what you’re charged.
- Payment is taken by Stripe, on Stripe’s own checkout page. Your card details go to Stripe and never reach us. Stripe’s own terms and privacy policy apply to the payment.
- Taxes. The total shown before you pay is everything we charge: we don’t add tax or fees on top at checkout. If labels are delivered to another country, its customs may charge duties or taxes; those are yours to pay.
- If a payment is reversed or disputed after the event, we may take back the credits it paid for, or stop or cancel the order it paid for.
13. Suggestions
If you send us an idea or a suggestion, we can use it to improve EncodeLabel without owing you anything.
14. Our name and site
- EncodeLabel™, the EncodeLabel logo and the site’s design, wording and software belong to EncodeLabel. You’re welcome to link to EncodeLabel, but please don’t use our name or logo in other ways without our permission.
- EncodeLabel is built with open-source software that belongs to its authors and is used under their licences: bwip-js (barcodes), jsPDF (PDF files) and SheetJS (spreadsheets).
15. Other companies’ names
EncodeLabel is an independent website. It isn’t affiliated with, sponsored by or endorsed by any of the companies whose names appear on it. Names of label papers, printers, barcode types, programs and devices are used only to say what EncodeLabel’s layouts and features are sized for or work with, and they belong to their owners.
- Avery and Avery product numbers are trademarks of Avery Products Corporation and/or CCL Label, Inc.
- DYMO and LabelWriter are trademarks of their owner, part of Newell Brands.
- Brother and P-touch are trademarks or registered trademarks of Brother Industries, Ltd.
- Zebra and ZPL are trademarks of Zebra Technologies Corp.
- GS1 is a registered trademark of GS1 AISBL. EncodeLabel is not affiliated with GS1 or GS1 US and does not issue or license GS1 numbers.
- QR Code is a registered trademark of DENSO WAVE INCORPORATED.
- Microsoft, Excel and Windows are trademarks of the Microsoft group of companies.
- Android, Chrome and Google Sheets are trademarks of Google LLC.
- Apple, iPhone, iPad, Safari, Mac and Numbers are trademarks of Apple Inc., registered in the U.S. and other countries and regions.
- USPS, Intelligent Mail, ZIP Code and ZIP+4 are trademarks of the United States Postal Service. EncodeLabel is not affiliated with the Postal Service, and barcodes made here are not postage.
- Stripe is a trademark of Stripe, Inc.
Brand names and product numbers beside a label paper show which sheets a layout is sized to fit. Always test on plain paper first.
16. Changes to EncodeLabel
We may change EncodeLabel, add or remove features or label layouts, change what is free, or stop it altogether. Before we shut it down, we’ll try to give notice on the site so you can download what you’ve saved; what happens to credits is in section 10, and orders already paid for will be printed or refunded.
17. No guarantees
EncodeLabel’s tools are provided “as is”. We work to keep them running and accurate, but as far as the law allows we make no promises about them. In particular, we don’t promise:
- that any barcode, QR code or tag made here will scan or read, on any scanner, phone or system;
- that labels will line up with any brand or type of label paper, printer or roll;
- that any number is valid, unique, yours to use, or will be accepted by anyone;
- that a label meets any standard, law or company’s requirements;
- that EncodeLabel will always be available or free of mistakes, or that saved labels and datalists will never be lost.
That includes the legal promises sometimes called implied warranties of merchantability, fitness for a particular purpose and non-infringement.
For labels we print for you, what we do when something is wrong is in section 11. The points above about scanning, numbers and requirements apply to printed labels too: we print what you approved.
18. Limits on our responsibility
As far as the law allows, EncodeLabel isn’t responsible for: labels that don’t scan, don’t line up or carry the wrong information; wasted labels, paper, ink, tags or time; products that are rejected, delisted, returned, recalled, fined or charged back; mail that’s late, lost or returned; lost labels or datalists; or indirect losses from using EncodeLabel, such as lost profits, sales or data.
If we are found responsible for something anyway, our total responsibility to you is limited to US$50 or what you paid us in the 12 months before the problem, whichever is more. Some places don’t allow these limits, so they may not all apply to you.
19. If someone makes a claim because of you
If what you print, upload, save or order, how you use labels made here, or your breaking these terms leads to a claim against EncodeLabel (for example from a brand owner, a retailer, or someone on a list you uploaded), you agree to cover the losses and reasonable costs (including legal fees) that come from it.
20. Ending
You can stop using EncodeLabel at any time, and delete your account on the Account page. We may suspend or close accounts that break these terms. The parts of these terms that are meant to last, such as the limits on our responsibility, still apply afterwards.
21. Changes to these terms
We may update these terms. We’ll change the date at the top, and for important changes we’ll put a notice on the site before they take effect. If you keep using EncodeLabel after that, you accept the new terms. An order is covered by the terms in force when you paid for it.
22. Laws that apply
These terms are governed by the laws of the State of New York, USA, without regard to its rules on conflicts of law. Any dispute will be decided by the state or federal courts in the State of New York, and you and we agree to those courts. If the laws where you live give you protections that can’t be signed away, you keep them.
23. The rest
If part of these terms can’t be enforced, the rest still applies. If we don’t enforce a rule straight away, we can still enforce it later. These terms, together with our Privacy Policy and Cookie Policy, are the whole agreement between you and EncodeLabel about using it.
24. Contact
Questions about these terms: privacy@encodelabel.com.
See also the Privacy Policy and the Cookie Policy.