Labels that print too low, drift down the sheet or come out smaller than the labels are nearly always one of a few causes, and each has a fix. Start with the test page on plain paper, then find your cause below. Further down: the print settings for your browser, phones, thermal printers, and straight answers about barcodes, QR codes, spreadsheets and what’s free.
Start here: print the test page on plain paper
Label sheets cost money and plain paper doesn’t. Before your first real sheet, print the test page for your label paper. It shows the outline of every label, with a cross in its middle and its number, and it tells you in one go whether your printer and its settings are right.
Print the test page on plain paper
Choose your label paper, then Print a test page in the print step of any tool, or get it from the Label paper page. Test pages never use up your free labels.
Hold it against a label sheet
Lay the print on a blank label sheet and hold the two up to a window or a lamp. Every printed box should sit on its label.
Read what it tells you
Boxes the right size, but all moved the same way: use the nudge buttons in the print step. Boxes too small, or drifting further off toward the edges or the bottom of the sheet: the page is being shrunk or the paper size is wrong, so set Scale to 100% and check the paper size.
Nearly every misprint is one of three things, and you can tell which by where on the sheet the error is. Each picture shows a test page held against a label sheet: the gray shapes are the labels, the black outlines are what the printer drew.
Scaled
Scale isn’t 100%: the page was shrunk
You see: the middle of the sheet is about right, and the error grows toward the edges and the bottom.
Why: a setting such as “Fit to page”, “Shrink to fit” or “Fit to printable area” made the whole page a little smaller.
Fix: set Scale to 100% or “Actual size”. Never use a Fit setting for labels.
Shifted
Everything moved the same way
You see: every label is off by the same distance, in the same direction.
Why: printers don’t all start the sheet in quite the same place. A millimeter or two high, low, left or right is normal.
Fix: use the nudge buttons in the print step. They move everything in steps of 0.25 mm (0.01 inch when you work in inches) and are remembered for that paper in this browser, and in your account when you’re logged in.
Wrong paper
Wrong paper size: A4 or Letter
You see: the first row is close, each row after it is further out, and the last row is badly off.
Why: the print window is set to a different paper size from the sheet in the tray. US Letter is 279.4 mm tall and A4 is 297 mm, and browsers sometimes go back to their own choice.
Fix: in the print window pick the paper size that matches the sheet: Letter for US sheets, A4 for most others.
Margins, headers and footers added by the browser
You see: everything a little smaller or pushed in from the edges of the sheet, and sometimes a date, a page title or a web address printed along the top or bottom.
That is the paper feed, and no setting will cure it. Use the manual or rear tray if your printer has one, set the paper type to Labels or Heavy paper so the sheet goes through slowly, fan the sheets before loading them, and feed one at a time if two go through together. Slide the tray’s paper guides in until they touch the sides of the sheet.
Each row a little further down: creep
You see: the top row lines up, and each row after it is a little further down (or up), so the bottom row is off by a millimeter or more.
Check first: the paper size in the print window is the size of the sheet, and Scale is 100%. Those two cause most drift.
If both are right: the printer is pulling the label sheet through at a slightly different speed from plain paper, which happens most with thick sheets. Set the paper type to Labels and use the manual or rear tray. If a little drift is left, nudge the print by half the error at the bottom, so the top and bottom rows are each off by only half as much.
Cut off at the edge of the sheet
Most desktop printers can’t print on the outer 6 mm or so (about ¼ inch) of the page. Keep text away from the outside edge of the outer labels. A Fit setting is not the cure: it shrinks everything else too.
Thermal printer: labels creep along the roll, or a blank one comes out
You see: on a roll printer, each label prints a little further along than the one before, or a blank label comes out between printed ones.
Why: the printer hasn’t found the gaps between the labels on this roll, or the label size set in the printer differs from the paper size in the print window.
Fix: after loading a new roll, run the printer’s label calibration, and set the same label size in the printer’s own settings and in the print window. Thermal label printers
Labels compatible with Avery® 5160 not lining up in Word
The same causes apply when you print from Microsoft Word. Check that the page size in Word is Letter, and that nothing in Word’s print settings or in the printer’s own Properties is set to fit, shrink or scale the page. If you set the label up yourself in Word’s Mailings › Labels › Options › New Label, one wrong number moves every row. The page for 1 × 2⅝ in labels, 30 per sheet has every number to type in, worked out from the sheet’s measurements. Or skip Word: make the labels here and print the PDF at 100%.
EncodeLabel isn’t made, tested or endorsed by the makers of Avery labels. Avery® is a trademark of its owner. The product number only shows which sheets the layout is sized to fit.
The print settings that matter
Whatever you print from, there are four things to check in the print window: the paper size, the scale, the margins, and headers and footers. Where each one is, and what it is called, depends on the browser.
Chrome
On Windows, Mac, Linux and Chromebooks. Other browsers built on Chrome, such as Brave and Opera, usually look the same.
In the print window, open More settings.
Paper size
The size of your sheet: Letter or A4.
Scale
Default, or Custom set to 100. Not one of the “Fit” choices.
Margins
None, if the choice is shown.
Headers and footers
Unticked, if the box is shown.
Edge
On Windows and Mac.
In the print window, open More settings.
Paper size
The size of your sheet: Letter or A4.
Scale
Actual size. Not “Fit to printable area”.
Margins
None.
Headers and footers
Unticked.
Look at the scale every time you print labels. We can’t promise which choice Edge starts on.
Firefox
On Windows, Mac and Linux.
Paper size
The size of your sheet: Letter or A4.
Scale
100. Not “Fit to page width”.
Margins
None. Firefox may still keep the thin strip your printer can’t print on.
Headers and footers
Untick “Print headers and footers”.
Still off? Choose Download PDF instead and print the file from a PDF reader at “Actual size”. Firefox’s wording changes between versions, so yours may read a little differently.
Safari on a Mac
On a Mac, Print gives Safari a finished PDF of your sheet.
Paper Size
The size of your sheet: US Letter or A4.
Scale
100%. Not “Scale to Fit”.
Headers and footers
Untick “Print headers and footers” if you see it.
If the PDF opens in Preview, the same settings apply there. Check that Scale really says 100% before you print.
iPhone and iPad
Safari, Chrome and every other browser on an iPhone or iPad print the same way.
We make a PDF. Tap Share, then Print.
Paper size
Your sheet’s size, if your printer offers the choice. That is usually the only setting there is.
Scale
Usually there is no setting for it, and some printers shrink the page a little.
So print the test page on plain paper first. If it is shrunk, save the PDF and print it from a computer.
Android
Chrome and other browsers on Android phones and tablets.
Tap Download PDF and open the file. Then choose Print from the menu, or share the file to your printer maker’s app.
Paper size
The size of your sheet: Letter or A4.
Scaling
If you’re offered a choice such as “Fit to page”, try each one on plain paper. What they do differs from printer to printer.
Print the test page on plain paper first.
Browsers rename and move these settings from time to time. If yours reads differently, the rule is the same: the right paper size, 100% scale, no margins, no headers or footers.
Printing from a phone or tablet
Making labels on a phone works well: a quick label, a sheet of the same label, or an address list. Printing is the weak part, because phones give you almost no say over the size of the print.
We always give a phone a finished PDF, the exact size of your sheet or label.
iPhone and iPad: tap Share, then Print. Or choose Save to Files and print it from there later.
Android: download the PDF, open it and choose Print from the menu, or share it to your printer maker’s app.
Test on plain paper first. If every label is off by the same amount, the nudge buttons fix it on a phone too. If the page is shrunk, the phone can’t put that right.
If it won’t print at the right size, send the PDF to a computer and print it there at 100%. Design it here, print it anywhere.
Using EncodeLabel from your Home Screen? If the PDF doesn’t open from there, open the site in your browser and try again.
Thermal label printers
Roll printers, the kind that print shipping labels without ink, treat every label as a page of its own. So the page size has to be exactly the size of one label.
On the Label paper page, pick a roll that matches your labels exactly, or type in your own size. A common one is 4 × 6 inches (about 100 × 150 mm).
In the printer’s own settings on your computer, choose the same label size.
In the print window: that paper size, Scale 100% or “Actual size”, Margins None, headers and footers off.
After loading a new roll, run the printer’s label calibration so it finds the gaps between labels. On many printers that is a button you hold down; the printer’s manual says how.
When the print step asks for your printer’s dots per inch (dpi), it is usually 203 and sometimes 300; the printer’s manual says which. We then make every bar a whole number of printer dots wide, which is what keeps a small barcode readable.
Darkness and speed are set in the printer’s own settings. Too dark and the bars thicken; too light and they break up.
Set-up screens differ from make to make, and we haven’t been able to check them all. Print one label before you print a roll.
Spreadsheets: leading zeros, 8.7E+11 and ZIP codes
A spreadsheet treats a long number as an amount, not a code, and that damages barcode numbers and ZIP codes. When you add a list we repair what can be proved, and tell you what we changed and on which rows.
A UPC that lost its first zero
A spreadsheet stores 036000291452 as the number 36000291452, so the first zero goes. A UPC that arrives one digit short gets its zero back when the number’s last digit (the check digit) proves the zero belongs there. If it doesn’t, we treat the number as missing its last digit instead, add it, and point out those rows so you can check them.
8.7E+11 instead of a number
That is a spreadsheet shortening a 12-digit number to fit the cell. If you add the Excel file itself (.xlsx), the whole number is usually still inside it and we read that. If a CSV file says 8.7E+11, the digits are gone and nobody can get them back from that file. In your spreadsheet, format the column as Text, type the numbers in again and export once more.
ZIP codes that lost a zero
ZIP codes in New England, New Jersey and a few other places begin with 0, and a spreadsheet turns 07030 into 7030. We put the zero back when the short ZIP fits the state on the same row, and we put the hyphen back in a nine-digit ZIP+4.
How to stop it happening
In Excel or Google Sheets, format the column as Text (“Plain text” in Google Sheets) before you type or paste the numbers into it.
What you can add
Excel (.xlsx or .xls), CSV, Numbers and OpenDocument files, or rows pasted straight from Excel or Google Sheets. Your list is read in your browser. It reaches us only if you log in and press Save.
Dates, prices and numbers in fields
A field such as {{Name}} puts a column of your datalist on each label. After the name you can move a date and give a format, after a bar (|). Type them in a text or barcode box, or let the Designer write them with Dates, prices and numbers… under that box.
Some examples, as they print on 21 October 2026:
{{today}}: the date the way your computer or phone writes it, 10/21/2026 on a US one and 21/10/2026 on a UK one.
{{today+30d}}: the date 30 days later (11/20/2026 on a US computer).
{{today|DD MMM YYYY}}: 21 OCT 2026, the same on every computer.
{{today+6m|MMM YYYY}}: APR 2027.
{{today|YYMMDD}}: 261021, the form GS1 barcodes use for a date.
{{today|YYJJJ}}: 26294, the year and the day of the year.
{{Expiry|DD/MM/YYYY}}: the Expiry column’s date, written 31/12/2026.
{{Price|$0.00}}: $12.50 for a price of 12.5.
{{Price|0,00 €}}: 12,50 €.
{{#|0000}}: 0007 on the seventh label.
{{UPC|GTIN-14}}: 00614141123452, the product number as 14 digits.
{{Sale price|or Regular price}}: the sale price, or the regular price on rows with no sale price.
{{Regular price|if Sale price}}: the regular price, only on rows that have a sale price.
{{Website|link}}: the Website column as a web address for a QR code, so shop.example.com/mug becomes https://shop.example.com/mug. An email address, a plain number or words with spaces print as written.
The date on the computer or phone you print from, by its own clock. It is fixed once for each print job, so every label of the job has the same date, and the print step says which date that is before anything is printed. A date with no format is written the way that device writes dates, so the same label says 10/21/2026 on a US computer and 21/10/2026 on a UK one. If it must look the same everywhere, give it a format: {{today|MM/DD/YYYY}} or {{today|DD MMM YYYY}}.
To print one date again and again (a batch made on one day, reprinted next week), choose One date I choose under Label, Dates in the Designer: it is kept with the label.
Moving a date
Add or take away days (d), weeks (w), months (m) or years (y): +30d, -2w, +6m, +1y, or both at once, +1y-1d. A month after 31 January is the last day of February, as in Excel. A column’s dates move the same way: {{Made+18m|MMM YYYY}}.
Date formats
D or DD is the day (5 or 05), M or MM the month (1 or 01), MMM its short name and MMMM its full name, YY or YYYY the year, DDD or DDDD the weekday, and JJJ the day of the year (001 to 366). Write a name in capitals and it prints in capitals: MMM gives OCT, Mmm gives Oct. Anything else prints as written; put words in double quotes, as in "Packed" DD/MM. Month and weekday names are in English.
Number formats
In a number format, 0 is a digit that always shows and # one that shows only when needed. Of a comma and a point, the last one is the decimal mark: #,##0.00 gives 1,234.50 and #.##0,00 gives 1.234,50. Whatever comes before or after the digits prints as written, such as $, €, kr or /kg. A half is rounded up, so 2.675 becomes 2.68. A percent sign is printed as written; the number isn’t multiplied by 100.
Dates and numbers in your list
EncodeLabel reads dates written 2026-10-21, 21/10/2026, 10/21/26, 21 Oct 2026 or October 21, 2026, and Excel’s date numbers (46316 is 21 October 2026; a workbook that counts from 1904, an older Mac setting, is read that way). A date such as 03/04/2026 could be 3 April or March 4, so it is never guessed: it prints as it is in your list and Check every row lists it, until you choose Day first or Month first under Label, Dates. A two-digit year is taken as the one within 50 years of today. Prices may be written 12.50, 12,50, $12.50 or 1,234.50. A cell that isn’t a date or a number prints as it is, and Check every row lists it too.
Product numbers
{{UPC|GTIN-14}} writes a UPC or EAN as 14 digits with zeros in front. {{UPC|GS1 link}} makes a GS1 Digital Link web address for a QR code (https://id.gs1.org/01/ and the 14 digits), which only opens a page once links are set up for that number at GS1. {{UPC|GS1 link shop.example.com}} makes the same kind of address on your own site (https://shop.example.com/01/ and the 14 digits), which opens a page only if your site answers it. For a QR code that simply opens your shop, put your web address itself in the QR code.
EncodeLabel prints the date in the form you choose. Which date a product needs, and how it must be written, depends on the product and where it is sold.
Barcode sizes
A scanner needs bars that are wide enough and a strip of blank space at each end. The tools show the real printed size of a barcode while you make it, with a note in plain words when it is getting small.
Retail barcodes (UPC and EAN)
The retail rules give a range of sizes, usually stated as 80% to 200% of the normal size. These widths include the blank space at each end.
A UPC-A inside the retail size range does not fit on a 1 × 1 inch label. The smallest size in the range is about 30 mm wide, and the label is 25.4 mm.
We print it anyway, because plenty of people put small UPC stickers on their own stock. On a 1 inch label it comes out at about 64% of normal size. Handheld scanners often read a UPC that small; a shop’s checkout scanner may not.
It also needs a sharp printer: a laser or inkjet printer of 600 dpi or better. On a 203 dpi thermal printer the smallest workable UPC-A is about 28 mm wide, which is wider than the label.
If the labels are for retail, use one of these instead:
A wider label. One that is 1.25 inches wide takes a UPC-A at 80%. A 1.5 × 1 inch label takes 80% to 100%.
UPC-E, a short form of UPC-A that is about 22 mm wide at normal size. Only numbers with a run of zeros in the right place can be written that way.
EAN-8, about 21 mm wide at 80%. It needs an 8-digit number of its own, which GS1 usually issues separately.
Barcodes for your own use (Code 128, Code 39)
For Code 128 and Code 39 outside retail and shipping there is no official smallest size. A common rule of thumb is a narrowest bar of about 0.25 mm; about 0.19 mm is usually the floor, and only on a printer of 300 dpi or better. Long text makes a long barcode: on a 1 inch label, Code 128 holds roughly 6 letters or 12 digits at 0.19 mm. For more than that, a QR code or Data Matrix fits better.
Three things that matter as much as size
The blank space at each end is part of the barcode. We include it in the size we show; don’t let text or the label’s edge run into it.
Dark bars on a light background. Black on white is best. Red, orange and yellow bars usually can’t be read, because most scanners see by red light, and light bars on a dark background generally can’t be read either.
Cartons need much bigger barcodes. For the shipping types (ITF-14 and GS1-128) the narrowest bar should be at least about 0.5 mm and the bars about 32 mm tall.
Whatever the size, check that it scans before you print a big batch.
Our QR codes are static: the link is stored in the code itself. It never expires, there is no limit on scans, and we can’t switch it off. The other side of that: to change the link, you make a new code.
How big a QR code has to be depends on how much is in it. More text means more squares, and so smaller ones.
For a short web address, about 2 cm (0.8 in) square is a safe smallest size.
On a 1 × 1 inch label, a web address of up to about 60 to 80 characters prints comfortably. A typical home-page address is about 25 to 35 characters and prints large.
Keep the blank border around the code. It is four squares wide and part of the code; we include it.
As a rule of thumb, a phone reads a code from up to about ten times its width away: a 2 cm code from about 20 cm.
On a 203 dpi thermal printer keep QR codes short. A long link there comes out with squares only two or three printer dots wide.
On an address label, a small QR code needs a label at least about ¾ inch tall, and works best with a link of about 60 characters or fewer.
If you can shorten the link, do: every character you take out makes the squares bigger. The green, amber and red size notes in the tools are our own rule of thumb, not an official standard, so scan one before you print a batch.
UPC numbers and GS1
We draw the barcode. The number has to be yours. EncodeLabel turns the number you type into a barcode and checks its last digit. It does not issue, sell or register UPC numbers, and it is not connected with GS1.
Selling in shops or on the big marketplaces? The number generally has to be one licensed to your business by GS1, the organization that issues them, and many retailers and marketplaces check numbers against GS1’s records. Ask the shop or marketplace what it needs.
Labeling your own stockroom, shelves or equipment? Any number works. Code 128 or a QR code is often a better fit there than a UPC.
The last digit is a check digit, worked out from the others. Type the first 11 digits of a UPC-A and we add it. Type all 12 and we tell you if the last one doesn’t match. That shows a number was mistyped, but not which digit is wrong.
UPC-A and EAN-13 are the same system. UPC-A has 12 digits and is used mainly in the US and Canada; EAN-13 has 13 and is used in most other places. A UPC-A with a zero in front is a valid EAN-13.
RFID in four sentences
The RFID page works out the exact code (the EPC) that belongs in an RFID tag, from your barcode number and a serial number. A web page can’t write an RFID chip by itself: an RFID label printer or encoder does that, from the printer file (ZPL, for Zebra RFID printers) or the spreadsheet we give you. Print one label and check it with an RFID reader before you run a batch, because only a reader can confirm what is on a tag. NFC tap tags, the kind phones read, are a different technology, and writing those from this site works only in Chrome on Android phones.
What’s free
Free for up to 100 labels a month. No account needed. The free labels start again on the first day of each month (next: 1 December).
What counts as a label
Every label in a PDF or a print job counts as one. A sheet of 30 is 30 labels.
One label saved as a picture (PNG or SVG) counts as one.
Each tag in an RFID export counts as one.
What never counts
Previews on the screen.
The alignment test page.
Making the same job again within 24 hours. Lining up a sheet, or downloading the same PDF a second time, costs nothing.
Without an account, labels are counted against a one-way scramble of your internet connection’s address and your kind of browser. No cookie is used. People who share a connection may therefore share the 100; a free account has its own 100 a month. To do the counting, the page tells us how many labels a job has and sends a fingerprint of the job: a code that doesn’t contain what is on the labels. That fingerprint is how making the same job again costs nothing.
If a job needs more labels than you have left, we say so with the numbers before anything is made, and offer to make just the labels you do have.
Credits
1 credit prints 1 label. Credits are only used once the month’s free labels are gone, and they don’t expire. Buying them needs a free account. You pay on Stripe’s checkout page, so no card number is ever typed on EncodeLabel.
An account is free and you don’t need one to make or print labels. It keeps your labels and datalists so you can open them on any device, and it has its own free labels each month; you need one to buy credits.
You can change your details, or delete the account and everything saved in it, whenever you like.
What you put on a label, and any spreadsheet you add, is read in your browser. It reaches us only if you log in and press Save.
A few necessary cookies keep you logged in and remember your answer about cookies and, if you switch it on, dark mode. Visits are counted without knowing who you are; one more cookie, only with your OK, tells new visitors from returning ones. No ads, no outside trackers.
Printing your own labels is free for up to 100 labels a month, and you don’t need an account. Past the 100, 1 credit prints 1 label. Previews, the alignment test page and making the same job again within 24 hours never count. The free labels start again on the first day of each month. There is no watermark. What counts as a label
What happens when I have used my free labels?
A job that needs more labels than you have left isn’t made, and we show you the numbers. You can make just the labels you have left, buy credits (1 credit prints 1 label), or wait: the free labels start again on the first day of next month.
Do I need an account?
No. You can make, print and download labels without one, and your last job is remembered in this browser. A free account keeps your labels and datalists so you can open them on any device, and you need one to buy credits.
Is my spreadsheet uploaded?
No. It is read in your browser. It reaches us only if you log in and press Save.
Why don’t my labels line up?
Nearly always the printer shrank the page. In the print window set Scale to 100 or “Actual size”, and turn off anything called “Fit”. If every label is off by the same amount in the same direction, use the nudge buttons in the print step. Print the test page on plain paper first. The three causes, with pictures
Which label sheets work?
Any make, as long as the measurements match. Pick a common size from the list, or type in the measurements of your own sheet or roll. Label paper
Can I print on a sheet I have already used part of?
Yes. In the print step, tap the first unused label on the picture of the sheet, and printing starts there.
What files can I add a list from?
Excel (.xlsx or .xls), CSV, Numbers and OpenDocument files. You can also paste rows copied straight from Excel or Google Sheets.
Excel turned my UPCs into 8.7E+11 or dropped the first zero. Can you fix it?
A missing first zero is put back when the number’s check digit proves it belongs there, and we tell you how many were repaired. If you add the Excel file itself (.xlsx), the whole number is usually still inside it. If a CSV file only says 8.7E+11, the digits are gone: format the column as Text in your spreadsheet, type the numbers in again and export once more. More about spreadsheets
Do the QR codes expire?
No. They are static: the link is stored in the code itself, so there is nothing for us to switch off and no limit on scans. The other side of that: to change the link, you make a new code.
Can I use the labels for my business?
Yes. What you make here is yours to use, at work or anywhere else.
Can I make up my own UPC number?
We draw the barcode for whatever number you type, and check its last digit. For a product sold in shops or on the big marketplaces, the number generally has to be one licensed to your business by GS1, the organization that issues them. For your own stockroom, any number works. UPC numbers and GS1
What is the difference between UPC-A and EAN-13?
UPC-A has 12 digits and is used mainly in the US and Canada. EAN-13 has 13 digits and is used in most other places. A UPC-A with a zero in front is a valid EAN-13.
How small can a barcode be?
A retail UPC should be at least 80% of its normal size, which is about 30 mm (1.2 in) wide including the blank space at each end. Smaller often works with a hand-held scanner but may fail at a shop checkout. The tools show the real size as you go. Check that it scans before you print a big batch. Barcode sizes
How small can a QR code be?
For a short web address, about 2 cm (0.8 in) square is a safe smallest size. More text means smaller squares, so it needs a bigger code. QR code sizes
Can I print from my iPhone or iPad?
Yes. We make a PDF and you print it from the Share menu. Phones give you little say over the size of the print, so try the test page on plain paper first. If it comes out shrunk, print the PDF from a computer. Printing from a phone or tablet
Does it work with thermal label printers?
Yes, with printers that print from your computer’s or phone’s ordinary print window. Choose a roll size that matches your labels, set the same size in the printer’s own settings, and print at 100%. We haven’t been able to test every make, so print one label before a roll. Thermal label printers
Can I make numbered labels (0001, 0002 and so on)?
Yes. In Quick label, turn on “Numbered series” and set where to start, how many, and the number of digits. Quick label
What is the RFID page for?
It works out the code (the EPC) that an RFID tag stores, from a product number and a serial number, and makes a printer file or a spreadsheet to take to an RFID printer. You still need an RFID printer or encoder to write the tag: a web page can’t do that by itself. RFID
Do credits expire?
No. 1 credit prints 1 label, and credits stay on your account until you use them.
Clear saved work on this device
So that you can carry on where you left off, this browser keeps the label you were last making in each tool, a short list of recent labels, the label paper you used last, any paper sizes you set up yourself, your print adjustments and a few preferences. A list you add is held only until you close the tab. None of it is sent to us, except that while you’re logged in, the paper sizes you set up and your print adjustments are also kept in your account, so every computer you log in on has them. Clearing this browser doesn’t remove them from your account; the Account page does.
On a shared or borrowed computer, clear it when you have finished.
Labels, datalists, paper sizes and print adjustments saved to an account are not touched, and you stay logged in. While you are, your paper sizes and print adjustments come back to this browser the next time you open a tool, the label paper pages or the home page.
How to reach us
Something not printing right, a label paper we don’t have, or an idea? Tell us. Messages go straight to the people who run EncodeLabel, and we read every one. Leave your email address if you’d like a reply.
It helps to say which browser, which printer and which label paper you are using.