Retail products
UPC-E barcode generator
Type a UPC-E number, or a UPC-A that can be shortened, and get the short barcode for small packs.
Make your own
Sets the printed size of the downloads.
Sample: 01234565
Type your own value to download it. The SVG prints at the size shown; the PNG is drawn for a 600 dpi printer. Each picture counts as 1 label. Free for up to 100 labels a month. No account needed.
Each picture counts as 1 label. Free for up to 100 labels a month. No account needed.
Work out the check digit
Type the first 7 digits (starting 0 or 1) to work out the 8th, or all 8 to check it. The check digit is the full UPC-A’s.
We draw the barcode; the number has to be yours. EncodeLabel doesn’t issue or license product numbers. For products sold in shops or on the big marketplaces they come from GS1. For your own stockroom any number works.
What UPC-E is
UPC-E is a UPC-A squeezed to about half the width by leaving out a run of zeros. It stands for the same 12-digit product number.
It is used on small retail packs in the United States and Canada where a full UPC-A doesn’t fit.
What fits
6, 7 or 8 digits, or a full UPC-A number that can be shortened. Only UPC-A numbers with a run of zeros in the middle can be written as UPC-E. The first digit is 0 or 1 and the last is the check digit of the full UPC-A.
Size facts
At standard size it is about 22 mm (0.87 in) wide with its blank margins, so it fits across a 1 inch label at full size; with its digits it is about 27 mm tall, so on a 1 inch square label print it at about 80%.
- Shape
- One row of bars.
- The sample
- About 68 bar-widths wide, blank margins included.
- Standard size (100%)
- Narrowest bar 0.33 mm. The sample is then about 22.3 mm (0.88 in) wide.
- Smallest retail size (80%)
- Narrowest bar 0.264 mm: about 17.9 mm (0.7 in) wide. Below this, handheld scanners often still read it, but a shop checkout may not.
- Largest retail size (200%)
- Narrowest bar 0.66 mm: about 44.6 mm (1.76 in) wide.
- Blank margin
- 9 bar-widths on the left, 7 on the right. It is already part of what we draw.
Sizes are advice, never a block: you can print smaller, and the size line beside the preview says what to expect. Check that it scans before you print a big batch.
Good label sizes for UPC-E
- Square labels, 1 × 1 in, 63 per sheet fits at the standard size (100%)
- Address labels, 1 × 2⅝ in, 30 per sheet fits at the standard size (100%)
- Print-to-the-edge square labels, 1½ × 1½ in, 24 per sheet fits at the standard size (100%)
Each page has the exact measurements and an alignment test page (PDF) to print on plain paper first.
Questions
- Can every UPC-A be turned into a UPC-E?
- No, only numbers with a run of zeros in the right place. Type your 12-digit UPC-A in the box above: if it can be shortened you get the UPC-E, and if not we say so.
- Does it scan as the same product?
- It stands for the same 12-digit number. Scanners can be set to report it in its short form or as the full UPC-A, so check how yours is set before you rely on it.
- Do I need an account to make UPC-E labels?
- No. Free for up to 100 labels a month, with no account needed. Each label you print, and each SVG or PNG you download, counts as one. What you see on screen never counts.
Related barcode types
- UPC-A The full 12-digit form of the same number.