29 × 90 mm labels on a roll
Compatible with Brother® DK-1201 and DK-11201
Standard address labels for label printers: each label is 3.543 in wide and 1.142 in long (90 mm × 29 mm).
Use this paper
Part of this page could not load, so the test page button is missing. Reload the page to try again.
Free for up to 100 labels a month. No account needed. A test page is never counted.
Measurements
| Measurement | Inches | Millimeters |
|---|---|---|
| Label width | 3.543 in | 90 mm |
| Label length | 1.142 in | 29 mm |
| Corners | Square | |
| Labels | One label per page: the page size in the print window is the label size | |
What fits on this label
- A QR code up to 1.14 in (29 mm) square fits, its blank border included. For a short web address such as https://www.encodelabel.com (27 characters) each square of the code is then about 0.78 mm: a comfortable size for phone cameras. Longer text means smaller squares. QR code labels
- A UPC-A barcode fits at the standard size (100%, 37.3 mm wide with its blank margins), bars at full height. On a label printer every bar is rounded to whole printer dots, which can make it print smaller than this: the print step shows the real size. UPC-A barcodes
- About 6 lines of 10 pt text fit, with a little room at the top and bottom: enough for a name and a three-line address.
Worked out from the measurements: advice, not a rule. The tools make any size and show the real printed size as you go. Barcode and QR code sizes
Printing tips for this kind of paper
- A roll printer treats each label as a page. In the printer’s own settings on your computer, set the paper size to the label size, then pick the same size in the print window. Thermal label printers
- After loading a new roll, run the printer’s label calibration so it finds the gaps between labels. The printer’s manual says how. Thermal label printers
- Print one label before a long run and check that it sits in the middle of the label. If it doesn’t, check the label size in both places and run the calibration again. Thermal label printers
Related sizes
All label paperQuestions
- Are DK-1201 and DK-11201 the same layout?
- Yes. Both numbers are in the “Compatible with” list on this page: the labels are the same size and in the same places, so these measurements and the test page fit both. Packs with different numbers can still differ in other ways, such as the printer they’re made for or the number of sheets.
EncodeLabel isn’t made, tested or endorsed by the makers of Brother® or DYMO® labels. Brother® and DYMO® are trademarks of their owners. The product numbers only show which sheets and rolls a size is made to fit. About brand names