12 mm round labels on a roll
Compatible with Brother® DK-1219 and DK-11219
Round labels for label printers: each label is 0.472 in wide and 0.472 in long (12 mm × 12 mm).
Use this paper
Part of this page could not load, so the test page button is missing. Reload the page to try again.
Free for up to 100 labels a month. No account needed. A test page is never counted.
Measurements
| Measurement | Inches | Millimeters |
|---|---|---|
| Label width | 0.472 in | 12 mm |
| Label length | 0.472 in | 12 mm |
| Shape | Round | |
| Labels | One label per page: the page size in the print window is the label size | |
What fits on this label
- A QR code up to 0.33 in (8.5 mm) square fits inside the curve, its blank border included. For a short web address such as https://www.encodelabel.com (27 characters) each square of the code is then about 0.23 mm: too small to scan reliably, so a QR code is a poor fit for this label. Longer text means smaller squares. QR code labels
- A UPC-A barcode inside the retail size range doesn’t fit: the smallest, 80%, is 29.8 mm wide with its blank margins. It can still be printed at about 26% (9.7 mm wide). Handheld scanners often read that; a shop checkout may not. On a label printer every bar is rounded to whole printer dots, which can make it print smaller than this: the print step shows the real size. UPC-A barcodes
- About 1 line of 10 pt text fit in the middle of the label, with a little room at the top and bottom.
Worked out from the measurements: advice, not a rule. The tools make any size and show the real printed size as you go. Barcode and QR code sizes
Printing tips for this kind of paper
- A roll printer treats each label as a page. In the printer’s own settings on your computer, set the paper size to the label size, then pick the same size in the print window. Thermal label printers
- After loading a new roll, run the printer’s label calibration so it finds the gaps between labels. The printer’s manual says how. Thermal label printers
- Keep the design centered: a round edge cuts off whatever sits in the corners. The tools place things inside the curve.
- Print one label before a long run and check that it sits in the middle of the label. If it doesn’t, check the label size in both places and run the calibration again. Thermal label printers
Related sizes
All label paper- 24 mm round labels on a roll, compatible with Brother® DK-1218 A near size
- 58 mm round labels on a roll, compatible with Brother® DK-1207 A near size
- ½ in round labels, 154 per sheet, compatible with Avery® 94503 The same size on a sheet
Questions
- Are DK-1219 and DK-11219 the same layout?
- Yes. Both numbers are in the “Compatible with” list on this page: the labels are the same size and in the same places, so these measurements and the test page fit both. Packs with different numbers can still differ in other ways, such as the printer they’re made for or the number of sheets.
EncodeLabel isn’t made, tested or endorsed by the makers of Brother® or Avery® labels. Brother® and Avery® are trademarks of their owners. The product numbers only show which sheets and rolls a size is made to fit. About brand names