12 mm wide continuous label tape
Compatible with Brother® DK-2214 and DK-22214
Continuous tape for label printers: 12 mm wide (0.472 in), cut to the length of each label.
Use this paper
Part of this page could not load, so the test page button is missing. Reload the page to try again.
Free for up to 100 labels a month. No account needed. A test page is never counted.
Measurements
| Measurement | Inches | Millimeters |
|---|---|---|
| Tape width | 0.472 in | 12 mm |
| Corners | Square | |
| Labels | One label per page: the page size in the print window is the label size | |
What fits on this label
- A QR code up to 12 mm (0.47 in) square fits across the tape, its blank border included. For a short web address such as https://www.encodelabel.com (27 characters) each square of the code is then about 0.32 mm: dense: a good printer and scanner will manage, but phone cameras may struggle, so keep the text short. Longer text means smaller squares. QR code labels
- A UPC-A barcode fits at the standard size (100%, 37.3 mm wide with its blank margins) (running along the long side of the label), with the bars shortened to about 12 mm tall in all, digits included, instead of 26.8 mm. Some shop scanners read short bars less easily. On a label printer every bar is rounded to whole printer dots, which can make it print smaller than this: the print step shows the real size. UPC-A barcodes
Worked out from the measurements: advice, not a rule. The tools make any size and show the real printed size as you go. Barcode and QR code sizes
Printing tips for this kind of paper
- A roll printer treats each label as a page. In the printer’s own settings on your computer, set the paper size to the label size, then pick the same size in the print window. Thermal label printers
- After loading a new roll, run the printer’s label calibration so it finds the gaps between labels. The printer’s manual says how. Thermal label printers
- Print one label before a long run and check that it sits in the middle of the label. If it doesn’t, check the label size in both places and run the calibration again. Thermal label printers
Related sizes
All label paper- ¾ × 2 in labels on a roll, compatible with DYMO® 30330 A near size
- 17 × 54 mm labels on a roll, compatible with Brother® DK-1204 A near size
- 50 × 25 mm labels on a roll A near size
Questions
- Are DK-2214 and DK-22214 the same layout?
- Yes. Both numbers are in the “Compatible with” list on this page: the labels are the same size and in the same places, so these measurements and the test page fit both. Packs with different numbers can still differ in other ways, such as the printer they’re made for or the number of sheets.
EncodeLabel isn’t made, tested or endorsed by the makers of Brother® or DYMO® labels. Brother® and DYMO® are trademarks of their owners. The product numbers only show which sheets and rolls a size is made to fit. About brand names