30 × 20 mm labels on a roll
Barcode label roll, for thermal label printers
Barcode label roll for label printers: each label is 1.181 in wide and 0.787 in long (30 mm × 20 mm).
Use this paper
Part of this page could not load, so the test page button is missing. Reload the page to try again.
Free for up to 100 labels a month. No account needed. A test page is never counted.
Measurements
| Measurement | Inches | Millimeters |
|---|---|---|
| Label width | 1.181 in | 30 mm |
| Label length | 0.787 in | 20 mm |
| Corner radius | 0.079 in | 2 mm |
| Labels | One label per page: the page size in the print window is the label size | |
What fits on this label
- A QR code up to 0.79 in (20 mm) square fits, its blank border included. For a short web address such as https://www.encodelabel.com (27 characters) each square of the code is then about 0.54 mm: a comfortable size for phone cameras. Longer text means smaller squares. QR code labels
- A UPC-A barcode fits at 80% of the standard size (30 mm wide with its blank margins), inside the 80% to 200% range retailers accept, with the bars shortened to about 20 mm tall in all, digits included, instead of 26.8 mm. On a label printer every bar is rounded to whole printer dots, which can make it print smaller than this: the print step shows the real size. UPC-A barcodes
- About 4 lines of 10 pt text fit, with a little room at the top and bottom.
Worked out from the measurements: advice, not a rule. The tools make any size and show the real printed size as you go. Barcode and QR code sizes
Printing tips for this kind of paper
- A roll printer treats each label as a page. In the printer’s own settings on your computer, set the paper size to the label size, then pick the same size in the print window. Thermal label printers
- After loading a new roll, run the printer’s label calibration so it finds the gaps between labels. The printer’s manual says how. Thermal label printers
- Print one label before a long run and check that it sits in the middle of the label. If it doesn’t, check the label size in both places and run the calibration again. Thermal label printers
Related sizes
All label paper- 1.2 × 0.85 in labels on a roll, compatible with Zebra® 10010037 A near size
- 1.25 × 1 in labels on a roll A near size
- 23 × 23 mm labels on a roll, compatible with Brother® DK-1221 A near size
- 1¼ × ¾ in labels, 72 per sheet, compatible with OnlineLabels OL285 The same size on a sheet
EncodeLabel isn’t made, tested or endorsed by the makers of Zebra®, Brother® or OnlineLabels labels. Zebra®, Brother® and OnlineLabels are trademarks of their owners. The product numbers only show which sheets and rolls a size is made to fit. About brand names