GS1 data and DataBar
GS1 DataBar Limited barcode generator
Type your value and see it drawn as GS1 DataBar Limited. Print it on label paper, or download it.
Make your own
Sets the printed size of the downloads.
Sample: (01)09521234543213
Type your own value to download it. The SVG prints at the size shown; the PNG is drawn for a 600 dpi printer. Each picture counts as 1 label. Free for up to 100 labels a month. No account needed.
Each picture counts as 1 label. Free for up to 100 labels a month. No account needed.
What GS1 DataBar Limited is for
Small healthcare items, scanned by hand.
GS1 DataBar Limited is the smallest DataBar. It holds a 14-digit GTIN that must start with 0 or 1, and it is read by handheld and similar scanners that see it straight on. It was made for small healthcare items. If your GTIN starts with another digit, use DataBar Truncated or Stacked instead.
What fits
13 or 14 digits starting with 0 or 1; the (01) in front is optional.
The 14-digit product number must start with 0 or 1.
Size facts
- Shape
- One row of bars.
- The sample
- About 73 bar-widths wide, blank margins included.
- At 0.25 mm bars
- The sample is about 18.3 mm (0.72 in) wide.
- Rule of thumb
- A narrowest bar of 0.25 mm or more is safe on an office printer. Under 0.17 mm is too fine to rely on.
- Blank margin
- None needed.
Sizes are advice, never a block: you can print smaller, and the size line beside the preview says what to expect. Check that it scans before you print a big batch.
Questions
- Do I need an account to make GS1 DataBar Limited labels?
- No. Free for up to 100 labels a month, with no account needed. Each label you print, and each SVG or PNG you download, counts as one. What you see on screen never counts.