GS1 data and DataBar
GS1 DataBar Stacked barcode generator
Type your value and see it drawn as GS1 DataBar Stacked. Print it on label paper, or download it.
Make your own
Sets the printed size of the downloads.
Sample: (01)09521234543213
Type your own value to download it. The SVG prints at the size shown; the PNG is drawn for a 600 dpi printer. Each picture counts as 1 label. Free for up to 100 labels a month. No account needed.
Each picture counts as 1 label. Free for up to 100 labels a month. No account needed.
What GS1 DataBar Stacked is for
Very small items such as vials, scanned by hand.
GS1 DataBar Stacked is the Truncated form split into two short rows, which puts a full GTIN in a very small, nearly square patch for things like vials and small tubes. Like Truncated, it is read by handheld scanners, not by checkout scanners.
What fits
13 or 14 digits; the (01) in front is optional.
Not for checkouts that scan from any angle.
Size facts
- Shape
- Rows of small bars, stacked.
- The sample
- About 50 bar-widths wide, blank margins included. Longer values make it wider.
- At 0.25 mm bars
- The sample is about 12.5 mm (0.49 in) wide.
- Rule of thumb
- A narrowest bar of 0.25 mm or more is safe on an office printer. Under 0.17 mm is too fine to rely on.
- Blank margin
- None needed.
Sizes are advice, never a block: you can print smaller, and the size line beside the preview says what to expect. Check that it scans before you print a big batch.
Questions
- Do I need an account to make GS1 DataBar Stacked labels?
- No. Free for up to 100 labels a month, with no account needed. Each label you print, and each SVG or PNG you download, counts as one. What you see on screen never counts.