GS1 data and DataBar
GS1 DataBar Truncated barcode generator
Type your value and see it drawn as GS1 DataBar Truncated. Print it on label paper, or download it.
Make your own
Sets the printed size of the downloads.
Sample: (01)09521234543213
Type your own value to download it. The SVG prints at the size shown; the PNG is drawn for a 600 dpi printer. Each picture counts as 1 label. Free for up to 100 labels a month. No account needed.
Each picture counts as 1 label. Free for up to 100 labels a month. No account needed.
What GS1 DataBar Truncated is for
Small items scanned by hand: a DataBar with shorter bars.
GS1 DataBar Truncated is DataBar Omnidirectional with much shorter bars. It holds the same 14-digit GTIN but is meant for handheld scanners held straight across it: a checkout scanner that reads from any angle may miss it. Use it on small items that are scanned by hand.
What fits
13 or 14 digits; the (01) in front is optional.
Not for checkouts that scan from any angle.
Size facts
- Shape
- One row of bars.
- The sample
- About 95 bar-widths wide, blank margins included.
- At 0.25 mm bars
- The sample is about 23.8 mm (0.94 in) wide.
- Rule of thumb
- A narrowest bar of 0.25 mm or more is safe on an office printer. Under 0.17 mm is too fine to rely on.
- Blank margin
- None needed.
Sizes are advice, never a block: you can print smaller, and the size line beside the preview says what to expect. Check that it scans before you print a big batch.
Questions
- Do I need an account to make GS1 DataBar Truncated labels?
- No. Free for up to 100 labels a month, with no account needed. Each label you print, and each SVG or PNG you download, counts as one. What you see on screen never counts.