Guide

Numbered labels and asset tags with barcodes

A different number on every label, as a barcode or a QR code, for equipment, bins, racks and anything else you count.

Updated

Make numbered labels

Choose the code

For your own numbers (asset tags, bins, parts, tickets) there is no rule about which barcode to use. What matters is what will read it:

CodeHoldsWidth of “A-0001”Choose it when
Code 128Letters, digits and keyboard symbols27.5 mm (1.08 in)You use a barcode scanner. It is compact and nearly every scanner reads it.
Code 39Capital letters, digits, space and - . $ / + %36.8 mm (1.45 in)An older system or scanner asks for it.
QR codeAny text, including a web address21 squares acrossPeople will scan with a phone camera, or the code should open a page.

The widths are with a narrowest bar of 0.25 mm and the blank margin at each end included, as measured with the site’s own engine. Code 39 has no lower-case letters: the tool turns them into capitals and tells you. Runs of digits take half the room of letters in Code 128, so “100245” makes a shorter barcode than “ABCDEF”.

A numbered series

The quick label tool makes the numbers for you. Switch on Numbered series and fill in:

SettingWhat it doesExample
Start atThe first number1
How manyHow many labels, up to 20,00030
Count up byThe step from one number to the next1
DigitsFills short numbers with zeros4 makes 7 into 0007
In frontLetters before the numberA-
BehindLetters after the number-B

With those examples the labels run A-0001-B, A-0002-B and so on. The tool shows the first and the last number before you print, and tells you if a number won’t fit the barcode type you chose. Each label gets its own number, as lets you change the type, and Show the number under the barcode prints the number in plain digits as well, for people to read.

Plan the digits for the most tags you will ever have. If you may pass 999, start with 4 digits now: A-0001 sorts before A-1000 in a spreadsheet, while A-2 sorts after A-10.

Asset tags

An asset tag usually carries a line such as “Property of …”, the barcode, and the number in plain digits. The designer has a layout for that: choose Layouts, then Asset tag, and type your own first line.

The top half of a sheet of 1 by 2⅝ inch asset tags, each with the line Property of Example Co., a Code 128 barcode and its number from A-0001 to A-0015
Asset tags A-0001 to A-0015 on 1 × 2⅝ in labels, 30 per sheet, drawn by the designer’s own layout.

Paper labels from an office printer are fine for things that stay indoors and aren’t handled much. For laptops, tools and anything that gets wiped, carried or left in the sun:

  • Use labels made to last, such as polyester or weatherproof labels, in a kind made for your printer (the pack says inkjet or laser).
  • Or cover a paper label with clear tape or laminate, then scan it through the cover to be sure it still reads.
  • Put the tag where it won’t be rubbed: on a flat face, away from edges and hinges.

Bin and rack labels

Bin and shelf labels are read from further away, and often by people as well as scanners, so make them bigger than an asset tag:

Printing a rack at a time? In the print step, Start each item on a new row puts each row of your list at the start of a new row of labels on the sheet, which makes them easier to peel off in order.

Tie the numbers to a spreadsheet

A tag is only useful if you can look the number up. Keep a spreadsheet with one row per tag: the number, what it is, where it is and who has it. You can print from the same spreadsheet:

  1. Add the list to the designer

    In the designer, choose Add a datalist and add your file, or paste the rows from your spreadsheet.

  2. Point the barcode at the number

    Pick the barcode on the label and choose your number column with Insert a field. Text boxes can show other columns, such as the item’s name.

  3. Print every row, or some twice

    Choose Every row of your datalist, or Use a quantity column for tags that need two labels. An empty cell counts as 1 and a 0 leaves the row out.

Your list is read in your browser and isn’t sent anywhere to make the labels.

Reprint one lost tag

When one tag is torn off, there is no need to waste a sheet:

  1. Type the number

    In the quick label tool, leave Numbered series off and type the number, exactly as before.

  2. Ask for one label

    Under How many, choose A set number of labels and set it to 1.

  3. Use a part-used sheet

    Under Start at, tap the first unused label on your sheet. Only that one label is printed.

Scan the new tag once before you stick it on, and check that it gives the same number as your spreadsheet.

Try it

Free for up to 100 labels a month. No account needed. Your labels are made in your browser.

Make numbered labels Printing help

Feedback

Suggestions and feedback

What would make EncodeLabel better, or what isn’t working? It goes straight to the people who run the site.

Only if you’d like a reply.

We use your email only to reply to you. Please don’t include passwords or private details. Privacy Policy

Add EncodeLabel to your Home Screen

One tap to your labels, like an app, with nothing to download from an app store.