Guide
How to print QR codes on label sheets
One QR code on a whole sheet, or a different code on every label from a spreadsheet, printed on your own label paper with an ordinary printer.
Updated
What to put in the code
A QR code holds text. What a phone does with it depends on what the text looks like:
- A web address is the usual choice. Start it with https:// so every phone opens it as a link; the quick label tool offers to add it when it is missing.
- Plain text, such as a box number or a short note, is shown on the phone’s screen as it is.
- Wi-Fi details go in a text format that many phone camera apps understand, written up by the ZXing barcode project (ZXing: Barcode contents). You don’t need to type it: in the quick label tool, choose Wi-Fi network under the box and fill in the network’s name and password. For a card with the network name and password printed on it as well, see Wi-Fi QR code cards for guests. Not every camera app offers to join the network, so scan the printed code with your own phone first, and remember that anyone who can see the label can read the password.
The codes EncodeLabel makes are static: what you type is stored in the code itself. A code never expires, there is no limit on how often it is scanned, and nobody can switch it off. The other side of that: to change what a code says, you print a new one. If the link points to a page you can edit, such as a shared document, you can change the page at any time without reprinting.
Which label paper
Square labels suit a QR code best, because the code is square. These cover most jobs:
| Label | Per sheet | Good for |
|---|---|---|
| 1 × 1 in squares | 63 (7 × 9) | Bins, jars, small boxes; a short link with a word under it |
| 1 in circles | 63 (7 × 9) | Lids and round tops; the tool keeps the code inside the circle |
| 1½ × 1½ in squares | 24 (4 × 6) | Moving boxes and shelves, read from further away |
| 1 × 2⅝ in strips | 30 (3 × 10) | A code with room for text beside it |
1 inch squares come 48, 63 or 80 to a sheet, depending on the maker, and the tool knows all three layouts. The 1½ inch squares are the layout of paper compatible with Avery® 22805, and the strips that of paper compatible with Avery® 5160. Search for the number on your pack in the tool’s label paper list, or measure a label and type in your own size.
Size and the blank border
The more text in a code, the more squares it needs, and on the same label each square gets smaller. This is how big the squares come out on two label sizes with a word printed under the code, measured with the site’s own layout:
| Link length | Squares across | On a 1 in label | On a 1½ in label |
|---|---|---|---|
| 23 characters | 25 | 0.62 mm | 0.94 mm |
| 38 characters | 29 | 0.56 mm | 0.84 mm |
| 53 characters | 33 | 0.50 mm | 0.75 mm |
| 77 characters | 37 | 0.46 mm | 0.69 mm |
| 111 characters | 45 | 0.39 mm | 0.58 mm |
Squares of about 0.4 mm or more are comfortable for phone cameras, and the tool shows a size note when a code gets dense. So keep links short: every character you take out makes the squares bigger. Leaving the word off under the code also gives the code more room.
Around every QR code is a blank border four squares wide. It is part of the code, and the tool includes it in the size it shows; don’t let text or the edge of the label run into it. As a rule of thumb, a phone reads a code from up to about ten times its width away. More in the QR code sizes part of the help.
A different code on every label, from a spreadsheet
For a code per bin, per box or per product, keep the links in a spreadsheet: one row per label, with a column for the link and one for the word printed under it.
Open the designer
In the designer, choose Add a datalist and add your file, or paste the rows.
Use the QR code layout
Under Layouts, pick the QR code layout. Point its link at your link column and its caption at your name column with Insert a field.
Step through the rows
The arrows under the label show each row as it will print, so you can check a few before printing.
Print every row
In the print step, choose Every row of your datalist. Start part-way down a used sheet with Start at if you like.
Address labels can carry a small QR code too: the address tool takes the link for each label from a column of your list.
Storage bins and moving boxes
A QR code on a box can open a list of what is inside. Make one page or note per box (a shared document, a photo album, a note in a notes app with a link to share), and put that page’s link in the code. The list can then change without the label changing.
- Print the box’s name under the code as well, so it can be read without a phone.
- On boxes that will be stacked, put a label on two sides.
- Check that the link opens for whoever will scan it: a document that only opens when you’re logged in won’t open on a helper’s phone.
Test-scan before you print the batch
Print one sheet on plain paper first. It shows whether the codes scan and whether the sheet lines up with your labels: hold it against a label sheet, up to a window. For the line-up alone, the tool’s Print a test page (under Line it up) draws every label’s outline and never counts towards your labels.
- Scan a few codes with more than one phone if you can, from the distance people will really scan from.
- Print in black on white, which gives a phone camera the most contrast to work with.
- If a code won’t scan, shorten the link, use a bigger label, or leave the caption off.
If the printed sheet is shrunk or drifts, the print settings are the cause: Scale 100%, Margins None and the right paper size. The printing help has them for each browser.
When to buy printed labels instead
Paper labels from an office printer are fine indoors. For labels that will be outdoors, get wet, be scrubbed or need to last for years, look for weatherproof or laminated labels made for your printer, or have them printed professionally.
Try it
Free for up to 100 labels a month. No account needed. Your labels are made in your browser.