Guide

Print barcode labels on a thermal printer

Roll printers print without ink, one label at a time. Set the label size once, let the printer find the gaps, and print from your browser.

Updated

Make a barcode label

Thermal labels or sheets?

An office printer prints a whole sheet of labels at once. A thermal label printer, the kind used for shipping and product labels, prints from a roll or a stack of single labels, one at a time, and treats every label as a page of its own.

  • Thermal suits a steady trickle of labels: a product label as each item is listed, a shipping label as each order is packed. Nothing is wasted on a half-used sheet.
  • Sheets suit a batch printed now and then, and printers you already have.

Either way the site makes the same labels. Choose a roll in the label paper step and the print step changes to suit it: one label per page, and a question about your printer’s dots per inch.

Set the label size in the printer driver

This is the step most people miss. The page size has to be exactly the size of one label, in three places:

  1. On this site

    Pick a roll that matches your labels in the label paper step, or type in your own size.

  2. In the printer’s own settings

    On your computer, open the printer’s preferences and set the same label size. The site reminds you in Print settings to check before you print.

  3. In the print window

    Choose that paper size, Scale 100% or “Actual size”, Margins None, and headers and footers off.

If a label prints too small, cut off or across two labels, check that the three sizes match.

Direct thermal or thermal transfer

Thermal printers work in one of two ways, and the labels must match:

Direct thermalThermal transfer
How it printsHeat darkens a chemically treated labelHeat melts ink from a ribbon onto the label
RibbonNoneNeeded
LastsSensitive to heat and light, which darken the labelDurable: the print can’t be rubbed off
Good forShipping labels and short-lived labelsProduct and asset labels that must last

Zebra explains both on its own pages (Zebra: direct thermal and thermal transfer). To tell which labels you have, Zebra suggests a scratch test: scratch the label with a fingernail, quickly and firmly. A black mark means direct thermal, no ribbon needed; no mark means thermal transfer, which needs a ribbon (Zebra: determining thermal media types).

Calibrate the gap sensor

A label printer finds the start of each label by sensing the gap between labels. After loading a new roll, and whenever labels start printing across the gap, run the printer’s label calibration. On many printers that is a button you hold down; the printer’s manual says how for your model.

  • Darkness and speed are set in the printer’s own settings, not on this site. Too dark and the bars thicken; too light and they break up.
  • Print one label after calibrating, before a long run.

Set-up screens differ from make to make, and we haven’t been able to check them all. Your printer’s manual is the authority for its own buttons and menus.

Which label size

Three roll sizes cover most jobs. The percentages are what a UPC-A comes out at on a 203 dpi printer, measured with the site’s own layout:

LabelGood forUPC-A at 203 dpi
2 × 1 inCode 128 product and bin labels, short text76% (below the retail 80%)
2¼ × 1¼ inRetail product labels with a UPC-A114%
4 × 6 inShipping labels; carton codes such as ITF-14 and SSCC-18Room for anything
A 2 by 1 inch label with the line Canvas tote, natural above a Code 128 barcode and the text SKU-10442 under it
A 2 × 1 in label with a Code 128 barcode, drawn for a 203 dpi printer.

Why 76%: at 203 dots per inch each dot is 0.125 mm, and the site puts every bar on whole dots so the barcode scans well. On a 2 × 1 inch label that leaves a UPC-A with bars two dots wide, 0.25 mm. Code 128 has no retail size range, so the same label suits it well. For UPCs that must scan at a shop’s checkout, use 2¼ × 1¼ inch labels.

When the print step asks for your printer’s dots per inch, it is usually 203 and sometimes 300; the printer’s manual says which.

Printing from Chrome and from a phone

On a computer, press Print and check the print window as above: the label’s paper size, Scale 100%, Margins None. Or choose Download PDF: the PDF is exactly the size of one label per page, and can be printed from any PDF reader at actual size.

On a phone or tablet, the site always makes a finished PDF, the exact size of your labels. On an iPhone or iPad tap Share, then Print; on Android, open the PDF and print it, or share it to your printer maker’s app. Phones give little say over the printed size, so print one label first. If it comes out shrunk, send the PDF to a computer and print it there.

The printing help has the same steps, and the print settings for each browser.

ZPL for RFID printers

RFID labels carry a chip as well as the printed barcode. A web page can’t write the chip by itself: an RFID label printer does that, from a printer file. The RFID page works out the code (the EPC) that belongs in each tag from your barcode number and a serial number, and makes a ZPL file for Zebra RFID printers or a spreadsheet for other encoders.

Print one label and check it with an RFID reader before you run a batch: only a reader can confirm what is on a tag.

Try it

Free for up to 100 labels a month. No account needed. Your labels are made in your browser.

Make a barcode label Printing help

Feedback

Suggestions and feedback

What would make EncodeLabel better, or what isn’t working? It goes straight to the people who run the site.

Only if you’d like a reply.

We use your email only to reply to you. Please don’t include passwords or private details. Privacy Policy

Add EncodeLabel to your Home Screen

One tap to your labels, like an app, with nothing to download from an app store.