Guide
Wi-Fi QR code cards for guests
A card guests scan to join your Wi-Fi network, with the network name and the password printed on it for anyone who would rather type them.
Updated
What’s on the card
The Wi-Fi card layout in the designer makes a card for one network, with these on it:
- A heading, “Scan to join the Wi-Fi”, which you can change.
- A QR code that holds the network’s name, its security and its password, in the format most phone cameras read.
- The network name, for people who would rather type it.
- The password, in bold Mono type, where a capital I and a small l don’t look the same. O and 0, and l and 1, still look much alike.
On wide cards the code is at the left and the words are beside it. On square cards the heading is on top, with the code under it and the words below.
Make the card
Start the layout
The button below opens the designer with the Wi-Fi card layout on 2 × 3½ inch business cards, 10 per sheet. A label you were working on stays one Undo away. In the designer, the layout is also under Layouts.
Type your network’s details
A pop-up, Your Wi-Fi network, asks for the Network name, exactly as phones list it, capitals and spaces included, then the Security and the Password. If the password shows as dots, Show password lets you check it. Press Make the card.
Check the card
Read the network name and the password on the card against your router’s settings, letter by letter. To change the heading, pick it and type your own in its Text box.
Print
Open Print. Fill the sheet prints a whole sheet of the card, and A set number of labels just as many as you need. Used part of a sheet? Under Start at, tap the first unused card on the picture of the sheet.
Not ready to type the details? Choose Later. The card then has Network: and Password: with a line to write on, and its QR code stays empty, printing nothing, until it has your network’s details: pick the code and choose Wi-Fi details… to add them.
Security and hidden networks
Under Security, choose what your router’s settings call the network’s security:
- WPA, WPA2 or WPA3, for most networks with a password.
- WEP, an old kind, only if the settings say WEP.
- None, for an open network with no password. The card then has no password line.
Tick Hidden network only if the network doesn’t appear in a phone’s list of networks. The code then tells the phone that the network is hidden, and the network name is printed in the same Mono type as the password, as guests who can’t scan will have to type it. Test such a card with more than one phone.
The card is for a network with one password for everyone. A network where each person logs in with a user name of their own, as at many offices and schools, can’t be put on it.
If your router has a guest network, put that one on the card, so the card never gives away the password of the network your own computers use.
Print the password, or leave it off
Print the password on the card is on at first. Untick it in the pop-up and the password line is left off the card, but the password stays inside the QR code: a phone needs it there to join.
The password is written in the code as plain text, so a scanner app can show it whether or not it is printed. Anyone who can see the card can read the password. Put the card where only the people you want on your network will see it.
Like anything you type, the network name and the password stay in your browser unless you log in and press Save. The designer keeps the card you were last making in this browser, password included, so on a shared computer clear saved work on this device when you have finished.
Test it with your own phones
Most phones offer to join the network when their camera scans the code. What a phone does is up to the phone and its camera app, though: not every camera app offers to join a network, and EncodeLabel can’t try your phones for you. Before you put the cards out:
- Print one card, on plain paper if you like.
- Scan it with a phone that hasn’t joined the network before. A phone that already knows the network may stay connected without showing whether the card works.
- Check that the phone really connects, not only that it offers to.
- If you can, try an iPhone and an Android phone, and a hidden or WPA3-only network on both.
EncodeLabel can’t check the details: it puts exactly what you type into the code. A password with one letter wrong, or a network name with a capital or a space out of place, makes a code that scans but doesn’t join. If a phone offers to join and then fails, check both against your router, letter by letter.
Cards, squares and labels
The card fits itself to any paper in the list, but on small labels the heading may be left off to make room for the QR code, and on the smallest labels the password line too. If the password doesn’t fit when you make the card or change its details, the designer says so: the password is then only in the QR code. Business cards and index cards can be handed out, framed or left on a table; labels stick to a wall, a desk or the router itself. Some that suit a Wi-Fi card:
| Paper | Size | Per sheet |
|---|---|---|
| Business cards, compatible with Avery® 5371 | 2 × 3½ in | 10 |
| Print-to-the-edge business cards, compatible with Avery® 8373 | 2 × 3½ in | 8 |
| 2 × 2 in square labels, compatible with Avery® 22806 | 2 × 2 in | 12 |
| 3 × 3 in square labels, compatible with Avery® 94101 | 3 × 3 in | 6 |
| Index cards, compatible with Avery® 5388 | 3 × 5 in | 3 |
| Postcards, compatible with Avery® 5389 | 4 × 6 in | 2 |
| Parcel labels, compatible with Avery® L7165 | 99.1 × 67.7 mm | 8 (A4) |
| Labels on a roll, for a thermal label printer | 4 × 6 in | A roll |
Business card sheets come 10 or 8 to a sheet: count the cards on yours and pick the matching paper.
Before the first real sheet, open Print, then Line it up, and choose Print a test page. Print it on plain paper and hold it against a sheet of cards, up to a window. It never counts toward your labels.
One card for each network
The layout makes one card at a time. It doesn’t take a datalist, so every card on the sheet is the same.
For a second network, say a guest network upstairs and another in the shop, print the first network’s cards, then pick the QR code, choose Wi-Fi details…, type the second network’s details, press Use these and print again. To use the rest of a part-used sheet, choose A set number of labels and, under Start at, the first unused card.
Just a QR code sticker
For a plain QR code with no card around it, say a small square label on the router or the fridge, the quick label tool has a form of its own: under the box, beside QR code for:, choose Wi-Fi network. It asks for the same details, and Use this puts the code in the box.
It can also put “Wi-Fi:” and the network name in Text below. It doesn’t print the password in words: only the code holds it.
When the password changes
A printed QR code can’t change: the password is stored in the code itself. When you change your Wi-Fi password or the network’s name, the old cards stop working, so make new ones.
Open the card
In the same browser, the designer still has the card you were last making. A card you saved is under Open.
Change the details
Pick the QR code, choose Wi-Fi details…, type the new password and press Use these. The network and password lines change with the code. If you had changed their words yourself, the designer leaves them as they are and says so: check them.
Print and swap
Print the new cards, scan one with your own phone, and take every old card away.
Try it
Free for up to 100 labels a month. No account needed. Your labels are made in your browser.