Guide
SSCC pallet labels with a GS1-128 barcode
A label with your SSCC in a GS1-128 barcode at the bottom, who the pallet is from, and its contents, count and batch when your list has them, on 4 × 6 in or A6 labels.
Updated
What an SSCC is
An SSCC (Serial Shipping Container Code) is an 18-digit number for one logistic unit, such as a pallet or a carton. Each pallet gets its own, and the number stays with it for its whole life. In a barcode it follows the identifier (00), so a scanner knows what the 18 digits are.
| Part | What it is |
|---|---|
| Extension digit | The first digit, 0 to 9, chosen by the company that makes the SSCC |
| GS1 Company Prefix | Your company’s number from GS1, 4 to 12 digits |
| Serial reference | Your own running number, in the digits that are left |
| Check digit | The last digit, worked out from the other 17 |
The check digit is worked out the same way as a UPC’s. On the SSCC-18 page, type the first 17 digits to get the 18th, or all 18 to check them.
Your prefix, your numbers
EncodeLabel doesn’t issue SSCCs or GS1 Company Prefixes. It draws the SSCCs you give it and checks their last digit. It isn’t connected with GS1.
In GS1’s rules, whoever builds the pallet, or the brand owner, allocates its SSCC from their own GS1 Company Prefix, which a GS1 member organization such as GS1 US allocates. A prefix may not be passed on, and GS1 calls SSCCs that an online label service makes from its own prefix “an incorrect use of the GS1 standards” (GS1 Logistic Label Guideline, note to rule 9-5).
So this site never numbers SSCCs. Its label number, {{#}}, starts again at 1 in every print job, and an SSCC must not be given out again within one year of the shipment date (GS1 General Specifications, 4.3.1.1). Keep the counter in your own system, never let it go back, and keep a record of the SSCCs you use.
- No prefix yet? UPC barcodes for small sellers explains how GS1 US hands out numbers. If you bought single product numbers rather than a prefix, ask GS1 how to number pallets.
- Does your customer or warehouse number them? GS1 lets the next party in the supply chain, such as a logistics provider, give an SSCC to a unit that arrives without one. Ask them first.
What goes on the label
A GS1 logistic label has addresses and other text at the top, data titles in the middle and barcodes at the bottom, with the SSCC, the one thing it must carry, in the lowest barcode. The Pallet label (SSCC) layout in the designer follows that order:
| Part | What it holds |
|---|---|
| From | Your business name and address, at the top |
| Ship to | SHIP TO and the address the pallet goes to, when your list has a Ship to column |
| Data titles | Each value in words after its GS1 title and a colon, such as COUNT: 40 or BEST BEFORE (dd.mm.yyyy): 31.12.2027 |
| Content barcode | A GS1-128 with (02) the content GTIN, (15) the best before date, (37) the count and (10) the batch, when your list has a GTIN and a count and the label has room for it (below) |
| SSCC barcode | At the bottom: a GS1-128 holding only (00) and the SSCC, with the digits under the bars |
On A6 and 4 × 6 in labels GS1 keeps the SSCC out of barcodes holding other data, so it has one of its own. The content barcode puts the parts of fixed length first, as GS1 asks, and the layout adds it only when its bars can be at least 0.495 mm wide at your printer’s dots, which on a 4 × 6 in roll usually means the content is in words only, in the data titles.
CONTENT is for a pallet that isn’t itself sold as one item and holds a single product: it is that product’s GTIN, and COUNT says how many of it are on the pallet. GS1 allows (02) only with (37), never with a GTIN (01), and a batch or date needs the content GTIN. A label carries one batch.
Make a pallet label
Start the layout
The button below opens the designer with the layout on a 4 × 6 inch roll. A label you were working on stays one Undo away.
Bring your SSCC
Do this first. Choose Add a datalist and, in the box for pasted rows, type SSCC on the first line and the pallet’s 18 digits from your own numbering on the next, then press Use these rows. If the pop-up shows Column 1, switch on First row is a header, then press Use 1 row. The barcode and its data title fill themselves in.
Say who it’s from
Pick the text at the top and type your business name and address in its Text box. It is the same on every label.
Check the number
Pick the SSCC barcode. If the last digit doesn’t fit the other 17, the line under its Value says so: the number was mistyped.
Print
Open Print. Every row of your datalist with 2 Copies of each row gives two identical labels, for two sides of the pallet.
No list? Pick the SSCC barcode and type your 18 digits in its Value box, then pick the data titles above it and put the same digits after “SSCC:”. They are two separate parts, so change both.
A label for each pallet, from a spreadsheet
Keep one row per pallet, with the SSCCs your own numbering gave out, under headings the layout looks for (capitals don’t matter):
| Column | Where it goes |
|---|---|
| SSCC (or SSCC-18, Serial shipping container code) | The SSCC barcode and its data title. Use all 18 digits, the check digit too: the data title prints the cell as it is. Needed: without it there is no SSCC barcode, and the designer says so (if none of your columns match, the label keeps its example number: don’t print it). |
| GTIN (or Content GTIN, GTIN-14, Item GTIN, UPC or EAN) | CONTENT, as 14 digits: a 12-digit UPC or 13-digit EAN gets zeros in front |
| Count (or Quantity, Qty, Units or Cases) | COUNT: how many of that product are on the pallet, as a whole number (1,200 becomes 1200) |
| Batch (or Batch number, Batch/lot, Lot or Lot number) | BATCH/LOT |
| Best before (or Best before date, Best by or BBD) | BEST BEFORE (dd.mm.yyyy) |
| Ship to (or Deliver to or Customer), else To (or Recipient or For) | SHIP TO and the address under it |
| SSCC | GTIN | Count | Batch |
|---|---|---|---|
095287654321012346 | 09521234543213 | 40 | L2611 |
095287654321012353 | 09521234543213 | 40 | L2611 |
095287654321012360 | 09521234543213 | 24 | L2612 |
GTIN and Count go together: fill in both on every row, or leave both columns out of a list of mixed pallets (a pallet of more than one product has no content GTIN).
Excel keeps only 15 digits of a number and drops leading zeros, and an SSCC has 18. Set the SSCC and GTIN columns to Text before you type or paste them: Leading zeros and long numbers shows how.
A best before date is written day first with dots, the way GS1’s own example writes it (here 31.12.2027), and goes into the content barcode, where it fits, as YYMMDD. One such as 03/04/2027 could be read two ways: it prints as it is, and Check every row lists it, until you choose Day first or Month first under Label, Dates.
Add the list before you change the label and the layout fills itself in; otherwise choose Layouts, then Pallet label (SSCC) again, and retype your From lines. Check every row lists any label that needs a look, such as a GTIN whose last digit doesn’t fit. In Print, keep Every row of your datalist: COUNT is what is on the pallet, not a number of labels. Your list is read in your browser and isn’t sent anywhere to make the labels.
4 × 6 in and A6 labels
GS1 leaves the size of the label to whoever makes it. It names A6 (105 × 148 mm) and 4 × 6 in for the SSCC alone or with a little more data, and A5 or 6 × 8 in for more. The layout is made for A6 and 4 × 6 in:
| Paper | Size | Per sheet |
|---|---|---|
| Shipping label roll for a thermal printer | 4 × 6 in | A roll, one at a time |
| Shipping label roll for a thermal printer | 100 × 150 mm | A roll, one at a time |
| Large shipping labels, compatible with Brother® DK-1241 | 102 × 152 mm | A roll, one at a time |
| Extra-large shipping labels, compatible with DYMO® 1744907 | 104 × 159 mm | A roll, one at a time |
| Shipping labels, 4 per sheet, compatible with Avery® Zweckform 3483 | 105 × 148 mm (A6) | 4 (A4) |
On other sizes the layout leaves out what doesn’t fit: first the content barcode, then the Ship to and From addresses, the other data titles and the SSCC line. The SSCC barcode always stays; on a label too low for bars 31.75 mm tall, such as 1 × 2⅝ in, it is alone and as large as fits. A half sheet of US Letter (5½ × 8½ in, compatible with Avery® 5126) has room for more: both addresses side by side and the batch in the content barcode.
On a label printer, set its dots per inch under Your label printer in Print, so the bars fall on whole printer dots. On A6 sheets, print the test page (Print, Line it up, Print a test page) before the first real sheet.
How big the barcode should be
For a GS1-128 on a pallet or carton, GS1 asks for this (GS1 General Specifications, sections 4.14 and 5.4, and symbol specification table 5):
| What | GS1’s figure |
|---|---|
| Narrowest bar | 0.495 to 0.940 mm (0.0195 to 0.0370 in) |
| Height of the bars | At least 31.75 mm (1.25 in), not counting the digits under them |
| Blank margin | 10 times the narrowest bar, left and right |
| Whole barcode | At most 165.10 mm (6.5 in) long, margins included |
| Digits under the bars | At least 3 mm tall, with the (00) and other identifiers in brackets |
On 4 × 6 in and A6 labels the layout draws the SSCC barcode as wide as the label allows, with its narrowest bar between 0.495 and 0.940 mm (about 0.56 mm on 4 × 6 in) and bars at least 31.75 mm tall.
On a smaller label, pick the SSCC barcode: under Printed size the designer says when the narrowest bar is below GS1’s 0.495 mm, as on 3½ × 5 in labels (about 0.49 mm). That is advice, and you can still print: your own scanners may well read it, but a warehouse or retailer may refuse it.
For words, GS1 asks for at least 3 mm (0.118 in) for text such as addresses, and says the data after the titles should be 7 mm (0.275 in) high. On 4 × 6 in and A6 labels the layout’s capitals are about 3 mm high with all five data titles and about 5 mm with the SSCC line alone: smaller than that 7 mm.
Where the labels go
From section 6.7 of the GS1 General Specifications:
- Height: the barcodes between 400 and 800 mm (16 and 32 in) above the base of the pallet, or as high as possible on a lower pallet.
- Edges: at least 50 mm (2 in) from any vertical edge, the barcode’s margins included.
- Two labels: two identical labels, one on a short side and one on the side to its right.
- Upright: the bars stand upright, like a picket fence. Stick the label the way it reads, with the SSCC barcode at the bottom.
- Cartons: the bottom of the barcode about 32 mm (1.25 in) above the base of the box, at least 19 mm (0.75 in) from any vertical edge, margins included.
GS1’s Logistic Label Guideline gives the reason for two labels: one is always in view (rule 8-3).
Stacked pallets each get their own SSCC, and GS1’s guideline gives a group held together by shrink-wrap or straps one more SSCC, on a label of its own.
Printing and checking
GS1’s guideline says label material and ink that are sensitive to heat aren’t acceptable, and to avoid thermal paper that changes color in heat or sun. Direct thermal labels, printed without a ribbon, darken with heat and light; thermal transfer labels use a ribbon (the two kinds). Which you use is for you and your customer to decide.
The guideline also asks for black barcodes on a white background, and for a printer that is checked regularly, serviced and calibrated (calibrate the gap sensor of a thermal printer after loading a new roll). Print one label on the labels and printer you will use, and scan it, before the batch.
GS1 sets a minimum print quality for this barcode, grade 1.5 (C) by the method of ISO/IEC 15416, and its guideline says logistic labels can be verified by GS1 member organizations or by companies GS1 authorizes. EncodeLabel can’t measure a printed label.
What your customer or carrier asks for
A GS1 logistic label can also have a customer part (where it goes, the purchase order number) and a carrier part (the ship-to postal code, the carrier’s routing), above the part with the SSCC. This layout has a Ship to address and nothing else of those.
EncodeLabel draws the label from what you give it. GS1’s own rules are in the General Specifications and the Logistic Label Guideline, which anyone can read at ref.gs1.org without logging in. Before you print the batch, check what your customer or carrier asks for.
Try it
Free for up to 100 labels a month. No account needed. Your labels are made in your browser.